To place order give missed call on  022 – 39560561

Cart

Product Details

Sale!

4,999.00 5,192.00

Water pH Tester (Manual Calibration)

HI98107P is a rugged pH tester with replaceable electrode and renewable reference junction. 

The instrument can be calibrated at two points by the user, simply acting on the offset and slope calibration trimmers

•Renewable junction

•Easy 1 or 2 point manual calibration

•700 hour battery life

•Simple to use

•Economical

Features at-a-glance :

HI98107P revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.

HI 98107P is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry.

pH Electrode with renewable junction

• With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI 98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life.

Calibration 

• Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester.

Battery

• With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

Specifications : 

  1. pH Range : 0.0 to 14.0 pH
  2. pH Resolution : 0.1 pH
  3. pH Accuracy : ±0.1 pH
  4. pH Calibration : Manual, 2 point, through offset and slope trimmers
  5. pH Electrode : In-build / Glass with renewable cloth junction
  6. Battery Type/Life : 4 x 1.5V alkaline / approximately 700 hours of continuous use
  7. Environment : 0 to 50°C (32 to 122°F); RH max 95%
  8. Dimensions : 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
  9. Weight : 95 g (3.4 oz.)
  10. Ordering Information : HI 98107P pH Tester supplied with protective cap, calibration screwdriver, batteries and instructions.

 

Warranty

• 6 months

Share this product

Description

HI98107P is a rugged pH tester with replaceable electrode and renewable reference junction. 

The instrument can be calibrated at two points by the user, simply acting on the offset and slope calibration trimmers

•Renewable junction

•Easy 1 or 2 point manual calibration

•700 hour battery life

•Simple to use

•Economical

Features at-a-glance :

HI98107P revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.

HI 98107P is used by millions of people around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry.

pH Electrode with renewable junction

• With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI 98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life.

Calibration 

• Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester.

Battery

• With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

Specifications : 

  1. pH Range : 0.0 to 14.0 pH
  2. pH Resolution : 0.1 pH
  3. pH Accuracy : ±0.1 pH
  4. pH Calibration : Manual, 2 point, through offset and slope trimmers
  5. pH Electrode : In-build / Glass with renewable cloth junction
  6. Battery Type/Life : 4 x 1.5V alkaline / approximately 700 hours of continuous use
  7. Environment : 0 to 50°C (32 to 122°F); RH max 95%
  8. Dimensions : 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
  9. Weight : 95 g (3.4 oz.)
  10. Ordering Information : HI 98107P pH Tester supplied with protective cap, calibration screwdriver, batteries and instructions.

 

Warranty

• 6 months

Additional information

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “Water pH Tester (Manual Calibration)”

Your email address will not be published. Required fields are marked *

Talk to us...