₹1,600.00 – ₹32,000.00
NTS Fulvic Acid Powder™
NTS Fulvic Acid Powder™
Fulvic acid in a concentrated, soluble powder – the most versatile and productive input in agriculture, in freight friendly form.
Fulvic acid is a powerful organic extract from humates which offers a host of benefits for both the soil and the plant.
Benefits
-
- Australian Certified Organic (ACO) Registered Farm Input 456AI.
- Natural chelating agent.
- Increases nutrient uptake.
- Promotes beneficial soil microbes.
- Improves availability of rock minerals.
- Increases crop yield and quality.
- Compatible with a wide range of other inputs.
- > 90% soluble.
Typical Analysis W/V
- Fulvic Acid : 70%
- Total Nitrogen (N) (as organic) : 2.5%
T - otal Phosphorus (P) (water soluble) : 0.1%
- Total Potassium (K) (as organic) : 6.9%
- Sulfur (S) : 3.9%
- Magnesium (Mg) : 1.8%
- Calcium (Ca) : 1.0%
- Solubility > 90%
- Particle Size : Very fine powder
Application Rates
Fertigation:
500 g – 1 kg per hectare
Foliar:
Horticulture
300 – 500 g per hectare
Broadacre
80 – 150 g per hectare
Important
Compatibility and/or performance cannot be
guaranteed when combining with other products.
Jar test for compatibility and spray on a small area
before widespread application.
– Avoid over-agitation/aeration during mixing to prevent
foaming.
– The insoluble sludge remaining is a valuable addition
to composts (~10% of the NTS Fulvic Acid Powder™
is insoluble).
DIY LIQUID FULVIC ACID RECIPE
Method 1: For small quantities
To make 10 L of fulvic acid liquid (8% fulvic acid)
add 1.25 kg of NTS Fulvic Acid Powder™ to a bucket.
Add a small quantity of water (~900 mL) to make a
slurry and stir vigorously until no lumps/dry powder
remain. Add water to make up 10 L and stir well. Let
sit overnight and then siphon the soluble fraction from
the top (av
Method 2: For larger quantities
Add NTS Fulvic Acid Powder™ very slowly to water in
a fertiliser pre-mixer vat while agitating to prevent lump
formation (if formed these lumps can be very difficult to
dissolve). Continue to mix for 3 hours. Let sit overnight
and then siphon the soluble fraction from the top
(avoiding insoluble sediment resting on the bottom).
The final liquid may need to be pre-filtered (with an
appropriate mesh size) to prevent equipment blockages.
Note: if your vat does not have vigorous agitation, premix
the powder in batches, prior to addition, following
Method 1.
Once the DIY Liquid Fulvic Acid is made up it must be
used promptly. Do not store for more than a few days.
Disclaimer: Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage,
handling, mixing, application or use, or weather, plant or soil conditions before,
during or after application (all of which may affect the performance of our program),
no responsibility for, or liability for any failure in performance, losses, damages, or
injuries (consequential or otherwise), arising from such storage, mixing, application,
or use will be accepted under any circumstances whatsoever. NTS recommend
you contact an Agronomist prior to product application. The Buyer assumes all
responsibility for the use of any NTS products.
Description
NTS Fulvic Acid Powder™
Fulvic acid in a concentrated, soluble powder – the most versatile and productive input in agriculture, in freight friendly form.
Fulvic acid is a powerful organic extract from humates which offers a host of benefits for both the soil and the plant.
Benefits
-
- Australian Certified Organic (ACO) Registered Farm Input 456AI.
- Natural chelating agent.
- Increases nutrient uptake.
- Promotes beneficial soil microbes.
- Improves availability of rock minerals.
- Increases crop yield and quality.
- Compatible with a wide range of other inputs.
- > 90% soluble.
Typical Analysis W/V
- Fulvic Acid : 70%
- Total Nitrogen (N) (as organic) : 2.5%
T - otal Phosphorus (P) (water soluble) : 0.1%
- Total Potassium (K) (as organic) : 6.9%
- Sulfur (S) : 3.9%
- Magnesium (Mg) : 1.8%
- Calcium (Ca) : 1.0%
- Solubility > 90%
- Particle Size : Very fine powder
Application Rates
Fertigation:
500 g – 1 kg per hectare
Foliar:
Horticulture
300 – 500 g per hectare
Broadacre
80 – 150 g per hectare
Important
Compatibility and/or performance cannot be
guaranteed when combining with other products.
Jar test for compatibility and spray on a small area
before widespread application.
– Avoid over-agitation/aeration during mixing to prevent
foaming.
– The insoluble sludge remaining is a valuable addition
to composts (~10% of the NTS Fulvic Acid Powder™
is insoluble).
DIY LIQUID FULVIC ACID RECIPE
Method 1: For small quantities
To make 10 L of fulvic acid liquid (8% fulvic acid)
add 1.25 kg of NTS Fulvic Acid Powder™ to a bucket.
Add a small quantity of water (~900 mL) to make a
slurry and stir vigorously until no lumps/dry powder
remain. Add water to make up 10 L and stir well. Let
sit overnight and then siphon the soluble fraction from
the top (av
Method 2: For larger quantities
Add NTS Fulvic Acid Powder™ very slowly to water in
a fertiliser pre-mixer vat while agitating to prevent lump
formation (if formed these lumps can be very difficult to
dissolve). Continue to mix for 3 hours. Let sit overnight
and then siphon the soluble fraction from the top
(avoiding insoluble sediment resting on the bottom).
The final liquid may need to be pre-filtered (with an
appropriate mesh size) to prevent equipment blockages.
Note: if your vat does not have vigorous agitation, premix
the powder in batches, prior to addition, following
Method 1.
Once the DIY Liquid Fulvic Acid is made up it must be
used promptly. Do not store for more than a few days.
Reviews
There are no reviews yet.